User Manual Q&AAnswer
Dec 15, 2024 - 09:44 PM
To connect the ST121HD20V HDMI Over CAT6 Extender, follow these steps:
1. Set up your Video Source Device (e.g., computer) and Display Device (e.g., monitor or TV).
2. Position the HDMI Transmitter near the Video Source Device.
3. Connect an HDMI Cable from the Video Source Device to the HDMI In Port on the back of the HDMI Transmitter.
4. Position the HDMI Receiver near the Display Device.
5. Connect a CAT6 Cable (sold separately) from the RJ45 Port on the HDMI Transmitter to the RJ45 Port on the HDMI Receiver. Note: Do not connect the cabling through any networking equipment like a router or switch.
6. Connect an HDMI Cable from the HDMI Out Port on the HDMI Receiver to the Display Device.
7. Connect the Universal Power Adapter to the DC 12V Port on the HDMI Transmitter and plug it into an AC Electrical Outlet to power both the HDMI Transmitter and HDMI Receiver.
For more detailed instructions and illustrations, please refer to the StarTech.com ST121HD20V HDMI Over CAT6 Extender Quick-Start Guide or the full product manual available at www.StarTech.com/ST121HD20V.
Add New Comment