User Manual Q&AAnswer
Dec 15, 2024 - 09:43 PM
To connect your audio source to the Monoprice 108232 Speaker Selector, follow these steps:
1. Make sure the amplifier power is OFF and set the volume to a minimum.
2. Strip ¼" of insulation from the end of each wire. Tightly twist the end of each wire until no frayed ends remain.
3. Insert each wire into the appropriate hole on the removable terminals.
4. Use a small screwdriver to tighten each wire in place.
5. Insert the connector plug into the socket and lock it in place by tightening captive screws on each side of the connector. The inputs are the connecting terminals for the amplifiers. Be sure not to reverse these connections or they will not function properly.
6. Each zone gets connected to a pair of speakers. Make sure you connect negative (-) to negative (-) and positive (+) to positive (+).
For more detailed instructions and illustrations, please refer to the Monoprice 108232 4-Channel A-B Speaker Selector User Manual.
Add New Comment