User Manual Q&AAnswer
Dec 15, 2024 - 09:13 PM
To connect the ST121R VGA Video Extender to your VGA video source and display, follow these steps:
1. Situate the Transmitter Unit (ST1214T or ST1218T) near your VGA video source and an available power source.
2. Connect the VGA video source to the VGA IN port on the Transmitter Unit using a male-female VGA cable.
3. Connect the Transmitter Unit to the power source using the power adapter provided.
4. Situate the Receiver Unit (ST121R) near your intended remote display(s) and an available power source.
5. Using the Monitor Out ports on the Receiver Unit, connect the Receiver to the display. Note that each Receiver unit can be connected to two separate displays simultaneously.
6. Connect the Receiver Unit to the power source using the power adapter provided.
7. Once the Transmitter and Receiver units have been positioned, connect the Cat5 OUT port provided by the Transmitter unit to the Cat5 IN port provided by the Receiver Unit using standard UTP cable with RJ45 connectors on each end.
Please refer to the StarTech.com ST121R VGA Video Extender User Manual for more detailed instructions and diagrams on how to connect the extender correctly.
Add New Comment