User Manual Q&AAnswer
Dec 15, 2024 - 08:49 PM
To connect the J-Tech Digital JTD-HD4X4-4K HDMI Matrix Switch Switcher to your devices, follow these steps:
1. Connect the HDMI sources (such as gaming consoles, Blu-ray players, PCs) to the HDMI input ports (labeled as INPUT 1-4) on the rear panel of the matrix switcher using HDMI cables.
2. Connect the HDMI displays (such as TVs or monitors) to the HDMI output ports (labeled as OUTPUT A-D) on the rear panel of the matrix switcher using HDMI cables.
3. Connect the included power adapter to the DC 12V port on the rear panel of the matrix switcher.
4. Plug the power adapter into a power outlet.
Note: It is important to connect the power adapter to the matrix switcher before plugging it into the power outlet to avoid any potential damage to the device.
Once the connections are made, you can use the included remote control or the matrix controller software (if applicable) to select the desired input source and output display. Refer to the user manual for detailed instructions on operating the matrix switcher.
Add New Comment