User Manual Q&AAnswer
Dec 15, 2024 - 08:33 PM
To pair the Vorlich AN-MR19BA Universal LG Magic Remote Control with your LG smart TV, please follow these steps:
1. Insert Batteries: Open the battery compartment on the back of the remote and insert two AAA batteries, making sure to match the positive and negative terminals correctly.
2. Turn on the TV: Ensure that your LG smart TV is turned on and in a state where it can receive signals from the remote.
3. Point the Remote: Point the Vorlich AN-MR19BA remote control towards the TV and keep it within a reasonable distance (approximately 3-5 feet).
4. Press and Hold the Home and Back Buttons: Simultaneously press and hold the "Home" and "Back" buttons on the remote control for about 5 seconds. The remote's pairing indicator light should start blinking.
5. Wait for Pairing: Keep the remote pointed at the TV and wait for the pairing process to complete. This may take a few moments.
6. Test the Remote: Once the pairing is successful, you can test the remote by pressing various buttons to control the TV's functions. Make sure the TV responds to the remote's commands.
If the pairing process is not successful, please ensure that you are following the steps correctly and that the batteries in the remote are properly inserted. Additionally, make sure that there are no obstructions between the remote and the TV that could interfere with the pairing process.
If you continue to experience difficulties, refer to the user manual for troubleshooting tips or contact the Vorlich customer support for further assistance.
Add New Comment