User Manual Q&AAnswer
Dec 16, 2024 - 10:19 AM
To install the guide plate and chain on the JPOWTECH JP-CS-6IN chainsaw, please follow these steps:
1. Begin by installing the guide plate. Ensure that the guide plate is oriented correctly according to the direction of the chain.
2. Pay careful attention to the direction of the chain as you install it. Make sure the teeth of the chain are facing in the correct direction.
3. Once the guide plate and chain are in place, attach the side panel cover over the guide plate and chain. Make sure it is securely fastened.
4. Position the nut over the bolt, but do not tighten it immediately. Ensure that the nut is loosely in place to allow for adjustments.
5. Adjust the tightness of the chain by turning the tensioning xxxx or xxxx . The chain should be secure but still flexible enough for proper operation.
6. Once the chain tension is adjusted, use a wrench to tighten the nut firmly, securing the side panel cover and the chain in place.
Please refer to the JPOWTECH JP-CS-6IN Small Portable Handheld Electric Power Chain Saw User Manual for more detailed instructions and illustrations.
Add New Comment