User Manual Q&AAnswer
Dec 14, 2024 - 05:39 AM
Adjusting the chain tension on the Saker SK1804DBT02-U Portable Electric Chainsaw Cordless is a straightforward process. Here are the steps to follow:
1. Ensure the chainsaw is turned off and the battery is removed for safety.
2. Locate the chain tensioning mechanism on the side of the chainsaw. It is usually a xxxx or xxxx that adjusts the tension.
3. Use a wrench or screwdriver (provided in the package) to loosen the chain tensioning mechanism. Turn it counterclockwise to loosen the tension.
4. Once the tensioning mechanism is loose, you can adjust the chain tension. Pull the chain lightly with your hand to check the tension. The chain should have a slight tension, but still be able to move freely along the guide bar.
5. If the chain is too loose, tighten the tensioning mechanism by turning it clockwise. Only make small adjustments at a time and check the tension frequently to avoid over-tightening.
6. If the chain is too tight, loosen the tensioning mechanism by turning it counterclockwise.
7. Once you have achieved the desired chain tension, tighten the tensioning mechanism securely.
8. Check the chain tension again by pulling it lightly. It should have the correct tension and move smoothly along the guide bar.
9. Reinstall the battery and ensure it is fully charged before using the chainsaw.
It is important to regularly check and adjust the chain tension as needed to ensure safe and efficient operation.
Add New Comment