User Manual Q&AAnswer
Dec 14, 2024 - 05:38 AM
To set up the Antonki ATHM011A Indoor Hygrometer Sensor, please follow these steps:
1. Placement: Choose the desired location for the sensor. Ensure that it is away from direct sunlight and sources of moisture.
2. Power: Open the battery compartment on the back of the sensor. Insert the included CR2032 button battery into the compartment, making sure to match the positive (+) and negative (-) signs.
3. Operation: Press the power button on the front of the sensor to activate it. The display will turn on, showing the current temperature and humidity readings.
4. Readings: Monitor the display to check the current temperature and humidity levels in the environment.
Note: The sensor will automatically calibrate itself within 3-5 minutes after turning on. During this time, it is recommended to leave the sensor undisturbed to ensure accurate readings.
If you encounter any issues during the setup process or have further questions, please refer to the user manual provided with the product or contact Antonki customer support for assistance.
Add New Comment