User Manual Q&AAnswer
Dec 14, 2024 - 05:28 AM
To set the time on the FirsTime & Co. 31063 Shiplap Gears Wall Clock, follow these steps:
1. Locate the dial on the back of the clock.
2. Turn the dial to set the correct time.
3. Make sure the clock hands are not touching or crossing over each other. If they are, gently bend them from the front to fix the issue.
4. To keep the hands from moving, ensure that the center pin that holds them together is tightly pushed in or screwed on.
5. Check if the clock is working by listening for the ticking sound and observing how the hands move.
Please refer to the "Setup Guide" section of the user manual for more detailed instructions on setting up the clock.
Add New Comment