User Manual Q&AAnswer
Dec 14, 2024 - 02:56 AM
To reverse the door swing on the Ivation IVABC620SS mini fridge, follow these steps:
1. Gather the required tools: a flathead screwdriver and a Philips screwdriver.
2. Lay the cooler on its side on a flat and level surface.
3. Use the flathead screwdriver to lift the cover (part 1) from the back of the cooler. Slide the cover forward to remove it. Use a thin towel between the screwdriver and the cooler to avoid scratches.
4. Use the Philips screwdriver to remove the upper hinge screws (part 2) and free the upper hinge (part 5) from the cooler. Slide the door off once the upper hinge is removed.
5. Remove the blanking plugs (part 8) from the top and bottom of the door and move them to the other side of the door. You may need to use a flathead screwdriver to remove them.
6. Remove the lower hinge screws (part 6) and both feet (part 7) to free the lower hinge (part 3) from the cooler. Also, remove the xxxx in front of the foot that was not on the side with the hinge.
7. Gently remove the flat cover (part 4) using a flathead screwdriver and mount it to the opposite side of the cooler. Press down to secure it in place.
8. Mount the upper hinge (part 2) in its new location, aligning it with the mounting holes. Press the cover (part 1) down over the upper hinge to attach it.
9. Align the door on the upper hinge (part 5). Bring the lower hinge (part 3) to the cooler, align it with the door, and fasten it to the cooler using the foot (part 7).
10. Fasten the lower hinge screws (part 6) to the lower hinge to complete the door mounting.
11. Mount the remaining foot (part 7) and xxxx it on the opposite side of the hinge.
By following these steps, you can successfully reverse the door swing on your Ivation IVABC620SS mini fridge.
Add New Comment