User Manual Q&AAnswer
Dec 14, 2024 - 02:40 AM
To set the time on the LIELONGREN LLR060AW LED Digital Wall Clock, please follow these steps:
1. Make sure the clock is plugged into a power outlet and turned on.
2. Locate the switch or button on the side or back of the clock to access the settings.
3. Press and hold the button until the time display starts flashing.
4. Use the same button to adjust the hours. Press it repeatedly until the desired hour is displayed.
5. Once the correct hour is set, press and hold the button again to switch to the minutes.
6. Use the button to adjust the minutes. Press it repeatedly until the desired minute is displayed.
7. After setting the minutes, press and hold the button once more to save the time and exit the setting mode.
8. The clock should now display the correct time.
Please note that the LIELONGREN LLR060AW LED Digital Wall Clock operates in either 12-hour or 24-hour format. If you prefer the 12-hour format, make sure to set the time accordingly (e.g., 1:00 PM instead of 13:00).
For more detailed instructions and illustrations, please refer to the user manual provided with the clock.
Add New Comment