Answer
Dec 14, 2024 - 01:35 AM
To set the time on the FirsTime & Co. 25708 Arlo Wall Clock, follow these steps:
1. Insert one AA battery into the marked space on the back of the clock. Ensure that the battery is fully charged for optimal performance.
2. Make sure that the metal points in the battery case touch both ends of the battery. If they don't, adjust them to ensure a solid connection.
3. Check that the clock's hands are not touching or crossing each other. If they are, gently bend or rotate them to the correct positions.
4. To prevent the clock from moving, ensure that the center pin that holds the hands together is tightly pushed in or screwed on, depending on the style of the clock.
5. If the problem persists after adjusting the hands, refer to the directions provided in the user manual for further troubleshooting steps.
6. Once the clock is set up correctly, it will start running and display the current time. If necessary, you can adjust the time by moving the clock's hands manually.
Please note that the FirsTime & Co. 25708 Arlo Wall Clock operates on a quartz movement, which should keep accurate time without frequent adjustments.
Add New Comment