User Manual Q&AAnswer
Dec 13, 2024 - 11:52 PM
To connect the SoundShaker TA-4800 Bass shakers Amplifier and Transducer to your audio system, please follow the installation guide provided. Here are the steps:
1. For a single bass out receiver setup:
a. Connect the power supply for the transmitter and the split cable end of the 3032 Y-Cable to the Audio In on the transmitter.
b. Connect the single end of the 3032 Y-Cable to one split end of the 3031 Y-Cable.
c. Connect the remaining ends of the 3031 Y-Cable to both your receiver and your subwoofer. Ensure all connections are secure and power up the transmitter.
2. For a dual bass out receiver setup:
a. Connect the power supply for the transmitter and the split cable end of the 3032 Y-Cable to the Audio In on the transmitter.
b. Connect the single end of the 3032 Y-Cable to your receiver.
c. Connect your receiver to your subwoofer. Ensure all connections are secure and power up the transmitter.
3. For the SoundShaker amplifier setup:
a. Connect the 3120 Long Cable to the SoundShaker port on the back of the 5012 Amplifier.
b. Attach the 3120 Long Cable to the 81-3108 Short Cables.
c. Connect each SoundShaker to an 81-3108 short cable.
Please refer to the installation guide for visual illustrations and additional information on syncing the amplifier and troubleshooting any issues you may encounter.
Add New Comment