User Manual Q&AAnswer
Dec 13, 2024 - 11:35 PM
Sure! Here are the step-by-step instructions for connecting the StarTech.com ST121SHD50 HDMI Dual Ethernet Cable Extender:
1. Install the Transmitter Unit:
a. Position the Transmitter Unit near the video source (e.g., computer, Blu-ray Player).
b. Connect an HDMI cable from the video source device to the "HDMI IN" on the Transmitter Unit.
c. (Optional) If you've chosen to power the kit from the Transmitter side, connect the provided power supply.
2. Install RJ45 terminated Cat5e/6 Ethernet Cables:
a. Connect an RJ45 terminated Cat5e/6 Ethernet cable to the LINK OUT A (RJ-45 connector) on the Transmitter unit.
b. Connect another RJ45 terminated Cat5e/6 Ethernet cable to the LINK OUT B (RJ-45 connector) on the Transmitter unit.
c. Connect the other end of the Cat5e/6 cable (from LINK OUT A) to the LINK IN A (RJ-45 connector) on the Receiver Unit.
d. Connect the other end of the Cat5e/6 cable (from LINK OUT B) to the LINK IN B (RJ-45 connector) on the Receiver Unit.
3. Install Receiver Unit:
a. Position the Receiver Unit near the video display (e.g., television, projector).
b. Connect the video source to the HDMI OUT on the Receiver Unit using an HDMI cable.
c. (Optional) If you've chosen to power the kit from the Receiver side, connect the provided power supply.
4. Your source video image will now appear on the remote video display.
Please refer to the StarTech.com ST121SHD50 HDMI Dual Ethernet Cable Extender User Manual for more detailed information and troubleshooting tips.
Add New Comment