User Manual Q&AAnswer
Dec 13, 2024 - 11:22 PM
To program the QFX REM-10 Universal 4-in-1 Smart TV Remote for your specific TV brand, you have two options: programming by brand or using the auto-search feature. Here are the steps for both methods:
Programming by Brand:
1. Press the "TV" button on the remote, followed by the button that corresponds to the brand of your TV. For example, press "TV + 2" for a Sony television.
2. Review the table of brands provided in the manual and find the corresponding button number for your TV brand.
3. Check if the basic buttons (such as power, volume, and channel) work correctly. If they don't, repeat step 1 with a different button number for your TV brand.
Auto-Search:
1. Ensure that your TV is turned on and the remote is pointed at it.
2. Press the "TV" button on the remote to access the TV programming mode.
3. Press and hold the power button until the TV button starts flashing.
4. Keep the remote control pointed at the TV and your finger on the "OK" button, ready to press.
5. Be patient, as this process may take a couple of minutes. Keep the remote control pointed at the TV and your finger on the "OK" button.
6. When the TV turns off, immediately press the "OK" button to record the TV code on the remote control.
7. Test the buttons on the remote control to see if they work properly (e.g., power on/off, volume control). If the buttons do not work, repeat the auto-search process.
Please note that these instructions are a general guide, and the specific steps may vary depending on your TV brand. For more detailed instructions and troubleshooting tips, refer to the user manual provided with the QFX REM-10 Universal 4-in-1 Smart TV Remote.
Add New Comment