User Manual Q&AAnswer
Dec 13, 2024 - 11:21 PM
The installation process for the AudioControl ACR-3 Remote depends on the mounting option chosen. Here are the steps for both bracket installation and custom installation:
Bracket Installation:
1. Slide under the dash and position the dash control in the desired mounting position.
2. Mark the two mounting holes on the underside of the dashboard.
3. Drill pilot holes at the marked positions.
4. Secure the dash control using two screws.
Custom Installation:
1. Disassemble the dash control from the mounting bracket.
2. Drill a 9/32" (7 mm) hole in the dashboard for the control.
3. Drill a 3/32" (2.3 mm) hole for the lock tab and a 1/8" (3 mm) hole(s) for the LED holder.
4. Reassemble the dash control components on the dashboard.
Please refer to the AudioControl ACR-3 Remote User Guide for detailed instructions and illustrations on the installation process.
Note: It is recommended to place the dash control within reach of the driver and in a spot where the LED is plainly visible for easy operation.
Add New Comment