User Manual Q&AAnswer
Dec 13, 2024 - 11:10 PM
To pair your device with the Pro Armor AU51040 Bluetooth SoundBar System, follow these steps:
1. Power on the soundbar using either the power button on the unit or the orange remote turn-on wire.
2. During the power-up process, the blue LED on the left of the control panel will blink, indicating that the soundbar is in Bluetooth search mode.
3. On your device, go to the Bluetooth settings and search for available devices.
4. When the search has connected with your device, "PRO ARMOR" should show up in the list of Bluetooth devices.
5. Select "PRO ARMOR" from the list to initiate the pairing process.
6. Once the connection is made, the blue LED on the soundbar will change to solid, indicating a successful pairing.
7. After the initial pairing, the soundbar will automatically reconnect to the paired device when powered on and in range.
8. If you want to connect a different device, you will need to disconnect the first device before pairing the new one.
9. When a phone call is received, the audio signal will mute but not disconnect.
10. To switch to the 3.5mm audio input, press and hold the power button for three seconds.
11. To switch back to Bluetooth mode, press and hold the power button again for three seconds.
Please refer to the Pro Armor AU51040 Bluetooth SoundBar System Operator's Guide for more detailed instructions and troubleshooting tips.
Add New Comment