User Manual Q&AAnswer
Dec 13, 2024 - 11:06 PM
To program the Philips SRP4320T/27 Universal Remote Control for your devices, follow these steps:
1. Locate the remote codes that correspond to your device. You can find the manufacturer codes in the user manual that comes with the remote or by visiting the Philips support website.
2. Hold down the SETUP button until the flashing red indicator light appears, then let go of the button.
3. Depress and then release the button for the device on the remote that you want to program (e.g., TV, DVD player, Blu-ray player).
4. To enter the code, start with the first number and work your way through the number buttons on the remote.
5. Aim the remote at the device and press a variety of buttons to see if the device reacts to the remote's input. This will help you determine if the code was entered correctly.
6. Repeat step 5 for each additional device you want to program.
If you are unable to discover a code that works for your device, it is possible that the universal remote is not compatible with your device. In that situation, you might want to consider using a different remote or one that is specifically intended to work with the device you have.
For more detailed instructions and troubleshooting tips, refer to the user manual that comes with the Philips SRP4320T/27 Universal Remote Control.
Add New Comment