User Manual Q&AAnswer
Dec 13, 2024 - 08:33 PM
To install the Klipsch R-5502-W II In-Wall Speaker, follow these steps:
1. Cut the appropriate size opening in the wall or ceiling using the template provided. If the template is not available, cutout dimensions are provided on the Klipsch website. Be careful not to cut through any existing wiring or plumbing.
2. Run speaker wiring (18 gauge minimum) to the openings, complying with all building codes in your area.
3. Attach the wire to the speaker using the wire’s color coding or markings as a guide to maintain proper polarity.
4. Insert the speaker assembly into the opening and attach it by tightening the four Phillips screws. The frame’s "dog" legs will swivel out and "sandwich" the wall and frame together. (Klipsch's new construction brackets make this simple if used prior to drywall installation.)
5. You may paint the speaker grilles before inserting them into the speakers. Klipsch grilles are designed to accept most types of paint. You may wish to remove the scrim material before painting. It can be reinserted after the paint is dry. Avoid excessive paint build-up in the grille perforations.
6. Press the grille into place.
For more detailed illustrations and information, please refer to the Klipsch R-5502-W II In-Wall Speaker Owner's Manual.
Add New Comment