User Manual Q&AAnswer
Dec 13, 2024 - 08:29 PM
To charge the battery of the Uniden Atlantis 275 Floating VHF Marine Radio, follow these steps:
1. Locate the battery compartment on the back of the radio.
2. Open the battery compartment by sliding the latch or pressing the release button, depending on the model.
3. Insert the rechargeable lithium-ion battery pack into the battery compartment, ensuring that the contacts align properly.
4. Close the battery compartment securely.
5. Connect the charging cable to the charging jack on the side of the radio.
6. Plug the other end of the charging cable into a power source, such as a wall outlet or a USB port on a computer.
7. The charging indicator on the radio will illuminate to indicate that the battery is being charged.
8. Allow the battery to charge fully. The charging time may vary, but it typically takes a few hours to fully charge the battery.
9. Once the battery is fully charged, disconnect the charging cable from the radio and the power source.
10. The radio is now ready to be used with the fully charged battery.
For more detailed instructions and illustrations, please refer to the "Charging the Battery" section in the Uniden Atlantis 275 Floating VHF Marine Radio Owner's Manual.
Add New Comment