User Manual Q&AAnswer
Dec 13, 2024 - 08:15 PM
To connect the Pyle PTVSP50BK Wireless TV Listening Speaker to your TV, follow these steps:
1. Determine the type of audio output your TV has. It can be either analog (RCA) or digital (optical or coaxial).
2. If your TV has an analog output (RCA), use the provided audio cable to connect the base of the Wireless TV Speaker to the TV's audio output ports.
3. If your TV has a digital output (optical or coaxial), use the included optical cable to connect the base of the Wireless TV Speaker to the TV's digital output port.
4. Make sure the TV speaker volume is set to low or off. On some TVs, you may need to access the TV's menu settings to adjust the audio/speaker settings.
5. Place the receiver on the base for charging for at least 6 hours before first use. The Low Battery/Charge indicator will blink during charging and will stay steadily lit when fully charged.
6. Turn on the receiver by rotating the switch xxxx . Adjust the volume and tone control to your preference.
7. The receiver will automatically sync with the base and start receiving audio from the TV. If the receiver has been inactive for too long and missed the contacts with the base, turn off the receiver and then turn it back on to re-sync with the base.
Note: For more detailed instructions and troubleshooting tips, refer to the Pyle PTVSP50BK Wireless TV Listening Speaker User Manual.
Add New Comment