User Manual Q&AAnswer
Dec 13, 2024 - 07:52 AM
To use the JACO Superior Products JSP-001 Tire Pressure Gauge, follow these step-by-step instructions:
1. Preparation: Ensure that the tire is cool to the touch before taking a pressure reading.
2. Attach the Gauge: Connect the 360-degree swivel chuck to the tire valve stem. Make sure the connection is secure.
3. Read the Pressure: The gauge's large 2-inch dial will display the current tire pressure. Take note of the reading.
4. Adjust as Needed: If the tire pressure is below the recommended level, inflate the tire until it reaches the desired pressure. If the pressure is too high, use the built-in air bleeder valve to release air until the desired pressure is reached.
5. Remove the Gauge: Disconnect the gauge from the valve stem and re-cap the valve.
It's important to note that the JACO Superior Products JSP-001 Tire Pressure Gauge does not require batteries as it operates mechanically. This means it is always ready to use and eliminates the need for regular battery replacements.
For more detailed instructions and information, please refer to the user manual provided with the product.
Add New Comment