User Manual Q&AAnswer
Dec 13, 2024 - 07:40 AM
Using the Vondior TPG-60T Tire Pressure Gauge is simple and straightforward. Here are the step-by-step instructions on how to use it:
1. Preparation: Before checking the tire pressure, ensure that the tire is cold. This means that the tire hasn't been driven on for at least a few hours.
2. Connecting: Attach the 360-degree swivel chuck of the gauge to the tire valve stem. Make sure it is firmly attached to prevent any air leaks.
3. Reading Pressure: Once the gauge is properly connected, read the tire pressure on the analog dial. The large 2-inch dial with clear markings makes it easy to read the pressure.
4. Adjusting Pressure: If the tire pressure is not at the recommended level, you can inflate or deflate the tire as needed to reach the desired pressure. Use an appropriate air source, such as an air compressor or gas station air pump, to make the necessary adjustments.
5. Removing Gauge: After obtaining the pressure reading and making any necessary adjustments, detach the gauge from the valve stem. Remember to replace the valve cap to prevent any air leaks.
It's important to note that the Vondior TPG-60T Tire Pressure Gauge does not require batteries and provides accurate readings without the need for digital displays. The analog design ensures reliable performance at all times.
For more detailed instructions and additional information, please refer to the user manual provided with the Vondior TPG-60T Tire Pressure Gauge.
Add New Comment