User Manual Q&AAnswer
Dec 13, 2024 - 07:09 AM
To set the alarm on the ANJANK EMAU-8002-WH Alarm Clock, please follow these steps:
1. Make sure the clock is plugged into a power source and turned on.
2. Locate the alarm button on the clock. It is usually labeled with an alarm icon.
3. Press and hold the alarm button until the alarm time starts flashing on the display.
4. Use the hour and minute buttons to set the desired alarm time. Press the hour button to adjust the hour and the minute button to adjust the minutes.
5. Once you have set the desired alarm time, press the alarm button again to confirm and save the setting.
6. The alarm is now set and will activate at the specified time. You can verify the alarm time by checking the display.
Note: The ANJANK EMAU-8002-WH Alarm Clock has a dual alarm feature, which means you can set two different alarm times. To set the second alarm, repeat the above steps, starting from step 3.
If you need further assistance or encounter any issues with setting the alarm, please refer to the user manual that came with the product.
Add New Comment