User Manual Q&AAnswer
Dec 13, 2024 - 06:39 AM
Using the GERCHWAY 200PSI 360° Tire Pressure Gauge is simple and straightforward. Here are the step-by-step instructions:
1. Remove the valve stem cap from your tire.
2. Firmly press the swivel chuck of the gauge onto the valve stem, ensuring a secure connection.
3. Hold the gauge in place until the reading on the dial stabilizes.
4. Read the pressure on the gauge dial.
5. Compare the pressure reading with the recommended PSI for your vehicle (usually found on a sticker inside the driver's door or in the owner's manual).
6. If the pressure is low, inflate the tire using an air compressor until it reaches the recommended PSI.
7. After inflating, re-check the pressure and repeat steps 3-5 if necessary.
8. Detach the gauge and replace the valve stem cap securely.
Please refer to the user manual provided with your GERCHWAY 200PSI 360° Tire Pressure Gauge for any additional information or specific instructions.
Add New Comment