User Manual Q&AAnswer
Dec 13, 2024 - 06:36 AM
To use the TireTek 170 PSI Tire Pressure Gauge, follow these steps:
1. Remove the valve stem cap from your tire.
2. Press the chuck of the gauge firmly onto the valve stem, ensuring a secure connection.
3. Hold the gauge in place until the reading stabilizes.
4. Read the pressure on the gauge dial.
5. Compare the pressure reading with the recommended PSI for your vehicle (usually found on a sticker inside the driver's door or in the owner's manual).
6. If the pressure is low, inflate the tire using an air compressor until it reaches the recommended PSI.
7. After inflating, re-check the pressure and repeat steps 3-5 if necessary.
8. Replace the valve stem cap securely.
For more detailed instructions, please refer to the user manual that comes with the TireTek 170 PSI Tire Pressure Gauge.
Add New Comment