User Manual Q&AAnswer
Dec 13, 2024 - 06:25 AM
Calibrating the AZUNO ATG200D02 Digital Tire Inflator is a simple process. Here are the steps to calibrate the tire inflator:
1. Ensure that the tire inflator is turned off and not connected to a tire valve.
2. Press and hold the power button for 3 seconds to enter calibration mode. The display will show "CAL" to indicate that it is in calibration mode.
3. Use the "+" and "-" buttons to adjust the displayed pressure to match a known accurate pressure source. This can be a calibrated pressure gauge or a tire pressure reference.
4. Once the displayed pressure matches the known accurate pressure, press and hold the power button for 3 seconds to exit calibration mode. The display will return to the normal mode, and the tire inflator is now calibrated.
It is recommended to calibrate the tire inflator periodically to ensure accurate pressure readings. Please refer to the user manual for more detailed instructions and illustrations on how to calibrate the AZUNO ATG200D02 Digital Tire Inflator.
Add New Comment