User Manual Q&AAnswer
Dec 13, 2024 - 06:23 AM
To set the desired pressure on the AstroAI CZK-66666 ACDC Air Compressor, please follow these steps:
1. Connect the air compressor to your car's 12V outlet or an AC power source.
2. Remove the valve cap from the tire's valve stem.
3. Connect the air nozzle to the valve stem securely.
4. Press the 'R' button on the air compressor to switch between pressure units (PSI, BAR, KG/CM2).
5. Use the '-' and '+' buttons to set the desired pressure. Refer to the tire pressure guide on the inside of your driver's door for guidance.
6. Press the inflate button to start the inflation process.
7. The air compressor will automatically shut off when the pre-set pressure is reached.
8. Press the inflate button again to return the air compressor to a normal state.
9. Disconnect the power cord from the tire and the air compressor.
10. Put the valve cap back on the valve stem.
Please refer to the AstroAI CZK-66666 ACDC Air Compressor USER MANUAL for more detailed instructions and safety precautions.
Add New Comment