User Manual Q&AAnswer
Dec 13, 2024 - 05:50 AM
To connect the Monolith THX-365C Ultra Center Channel Speaker to your home theater system, follow these steps:
1. Identify the center channel speaker output on your AV receiver or amplifier. It is usually labeled as "Center" or "C."
2. Use speaker wire to connect the positive (+) terminal on the back of the Monolith THX-365C speaker to the positive (+) terminal on the center channel output of your AV receiver or amplifier. Similarly, connect the negative (-) terminal on the speaker to the negative (-) terminal on the receiver or amplifier.
3. Ensure that the connections are secure and tight to avoid any audio distortion or loss.
4. Once the speaker is connected, place it in the desired location in your home theater setup. It is typically positioned below or above the television screen, aligned with the other speakers in your system.
5. Power on your AV receiver or amplifier and configure the speaker settings in the receiver's setup menu. Select the appropriate speaker size, crossover frequency, and level settings for the center channel speaker.
6. Test the audio output by playing a movie or TV show with dialogue. Adjust the volume and other settings as needed to achieve the desired sound balance.
By following these steps, you should be able to successfully connect and set up the Monolith THX-365C Ultra Center Channel Speaker in your home theater system. For more detailed instructions and troubleshooting tips, refer to the user manual provided with the speaker.
Add New Comment