User Manual Q&AAnswer
Dec 13, 2024 - 05:49 AM
To connect the Polk T30 speaker to your amplifier or receiver, follow these steps:
1. Make sure the amplifier or receiver is turned off before making any connections.
2. Identify the red (+) and black (-) connectors on both the amplifier/receiver and the T30 speaker.
3. Take the speaker wire and insert the bare wire end through the hole in the binding post connector on the T30 speaker.
4. Tighten the hex nut on the binding post connector to secure the connection. Ensure that the wire is securely fastened and there is no loose connection.
5. Repeat the process for the other speaker wire, connecting the red (+) and black (-) connectors on the amplifier/receiver to the corresponding connectors on the T30 speaker.
6. Double-check all connections to ensure that the wires are correctly connected and there are no loose or reversed connections.
7. Once all connections are secure, you can turn on the amplifier or receiver and start enjoying the audio from your Polk T30 speaker.
Note: It is important to avoid supplying power to the speaker system that exceeds its maximum input. Always turn off the amplifier when connecting or disconnecting cables. Additionally, if you are using a graphic equalizer, avoid excessive amplifier volume to prevent input overload.
Add New Comment