User Manual Q&AAnswer
Dec 13, 2024 - 05:24 AM
To set the alarm on the Reacher C10 Digital Alarm Clock, follow these steps:
1. Press the "ALARM 1" or "ALARM 2" button to select the alarm you want to set.
2. Press the "SET+" or "SET-" button to enter the alarm hour setting. Adjust the hour to the desired time.
3. Press the "SET+" or "SET-" button to enter the alarm minutes setting. Adjust the minutes to the desired time.
4. Press the "SET+" or "SET-" button to enter the alarm mode setting. You can choose between All-7-day, Weekday, or Weekend alarm modes. The selected mode will blink on the display.
5. Press the "SET+" or "SET-" button to enter the alarm ringtone setting. You can choose from five available alarm sounds: Flute, Bird, Piano, Forest, or Bell.
6. Press the "VOL+" or "VOL-" button to adjust the alarm volume. The volume level ranges from 1 to 15, with 10 being the default level.
7. Press the "ALARM 1" or "ALARM 2" button to confirm and exit the alarm setting.
Note: The alarm volume level can be adjusted while the alarm is ringing or when setting the alarm.
For more detailed instructions and illustrations, please refer to the Reacher C10 Digital Alarm Clock User Manual.
Add New Comment