User Manual Q&AAnswer
Dec 13, 2024 - 05:04 AM
To set the alarm on the JACKYLED SD121090603 Alarm Clock with USB Charger Power Strip, please follow these steps:
1. Make sure the clock is plugged into a power source and the LED screen is displaying the current time.
2. Locate the buttons on the top or side of the clock labeled "Alarm 1" and "Alarm 2".
3. Press and hold the "Alarm 1" or "Alarm 2" button until the hour digits start flashing on the LED screen.
4. Use the "+" and "-" buttons to adjust the hour to the desired alarm time.
5. Once the hour is set, press the "Alarm 1" or "Alarm 2" button again to move to the minute digits.
6. Use the "+" and "-" buttons to adjust the minute to the desired alarm time.
7. After setting the minute, press the "Alarm 1" or "Alarm 2" button again to confirm the alarm time.
8. The alarm is now set and will activate at the specified time. The alarm will sound for a few minutes or until manually turned off.
Note: If you want to turn off the alarm temporarily without changing the set time, you can press the "Nap" button to activate the 9-minute nap mode. The alarm will stop and resume after 9 minutes.
For more detailed instructions and additional features of the JACKYLED SD121090603 Alarm Clock with USB Charger Power Strip, please refer to the user manual provided with the product.
Add New Comment