User Manual Q&AAnswer
Dec 13, 2024 - 04:42 AM
To set the time on the VANGOLD HG-014 Modern 3D Wall Clock, follow these steps:
1. Open the clock's battery compartment by gently sliding or lifting the cover.
2. Insert one AA battery into the designated space, ensuring the positive (+) and negative (-) ends are aligned correctly.
3. Locate the clock's time adjustment xxxx or dial on the back or side of the clock.
4. Turn the xxxx or dial clockwise or counterclockwise to set the correct time. Pay attention to the clock's hands as you adjust the time.
5. Once the desired time is set, securely close the battery compartment cover.
6. The clock will now display the correct time and continue to keep accurate time using its automatic watch movement.
Note: It is recommended to periodically check the clock's time and make adjustments if necessary, especially after daylight saving time changes or when the battery is replaced.
Add New Comment