User Manual Q&AAnswer
Dec 13, 2024 - 04:38 AM
To connect the Voyager Focus UC to your device, follow these steps:
1. Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
2. The USB adapter LED will flash and then turn solid to indicate that the headset is connected to the USB adapter. If you are wearing your headset, you will hear "PC connected" to confirm the connection.
3. Load the Poly Lens Desktop App by visiting www.poly.com/lens. This app allows you to customize your headset behavior through advanced settings and options.
4. To configure your Bluetooth USB adapter to play music on Windows, go to the Start menu > Control Panel > Sound > Playback tab. Select "Poly BT700" or "Plantronics BT600" as the Default Device and click OK.
5. To pause music when you place or receive calls on Windows, go to the Start menu > Control Panel > Sound > Communications tab and select the desired parameter.
6. To configure the Bluetooth USB adapter on a Mac, go to the Apple menu > System Preferences > Sound. On both the Input and Output tabs, select "Poly BT700" or "Plantronics BT600".
7. To pair your headset with a mobile device, put your headset in pair mode by sliding and holding the Power switch away from the off position until you hear "pairing" and the headset LEDs flash red and blue. Then, select "Poly VFocus" on your mobile device. Once successfully paired, you will hear "pairing successful" and the headset LEDs will stop flashing.
Please refer to the user guide for more detailed instructions and troubleshooting tips.
Add New Comment