User Manual Q&AAnswer
Dec 13, 2024 - 04:20 AM
To calibrate the pressure gauge on the SATA ST98100U Tire Inflator, please follow these steps:
1. Ensure that the inflator is turned off and disconnected from the tire valve.
2. Press and hold the power button for 5 seconds to enter the calibration mode. The display will show "CAL".
3. Use the + and - buttons to adjust the pressure to the desired calibration value. You can refer to a calibrated pressure gauge or a reliable source for the correct pressure value.
4. Once the desired calibration value is set, press and hold the power button for 5 seconds to confirm the calibration. The display will show "CAL OK" to indicate that the calibration is successful.
5. You can now use the inflator with the calibrated pressure gauge for accurate readings.
Please note that it is important to calibrate the gauge periodically to ensure accurate readings. If you continue to experience issues with accuracy after calibration, please contact customer support for further assistance.
Add New Comment