User Manual Q&AAnswer
Dec 13, 2024 - 04:03 AM
To connect external devices to the Pyle PPRE70BT Rack Mount Studio Pre-Amplifier, follow these steps:
1. For audio devices with RCA outputs (such as a DVD player), use RCA cables to connect the audio output jacks of the device to the RCA inputs on the pre-amplifier. The RCA inputs are located on the rear panel of the pre-amplifier.
2. For devices with a 3.5mm headphone jack (such as a smartphone), use a 3.5mm auxiliary cable to connect the device's headphone jack to the 3.5mm input jack on the front panel of the pre-amplifier.
3. If you have a microphone with a 1/4" or XLR connector, use a 1/4" or XLR cable to connect the microphone to the corresponding input jack on the front panel of the pre-amplifier.
4. Once all the devices are connected, use the input selector button on the front panel or the remote control to choose the desired input source.
5. Adjust the level control for the microphone input, if necessary, using the level control xxxx on the front panel.
6. Adjust the volume and tone settings (bass, treble, mid) using the corresponding knobs on the front panel.
By following these steps, you can easily connect and use external devices with the Pyle PPRE70BT Rack Mount Studio Pre-Amplifier. For more detailed instructions and information, refer to the user manual provided with the product.
Add New Comment