User Manual Q&AAnswer
Dec 13, 2024 - 04:01 AM
To connect external speakers to the Crosley CR8017U Voyager Turntable, you can use the RCA outputs or the headphone jack. Here are the steps:
1. RCA Outputs:
a. Locate the RCA jacks on the back of the turntable. They are labeled as "RCA Jacks" in the product description.
b. Connect the RCA cables from the turntable's RCA outputs to the RCA inputs on your external speakers or stereo system. The red plug should connect to the right channel input, and the white plug should connect to the left channel input.
c. Make sure the external speakers or stereo system is powered on and set to the correct input/source.
2. Headphone Jack:
a. Locate the headphone jack on the front or side of the turntable. It is labeled as "Headphone Jack" in the product description.
b. Connect a 3.5mm audio cable from the headphone jack of the turntable to the input of your external speakers or stereo system.
c. Make sure the external speakers or stereo system is powered on and set to the correct input/source.
By following these steps, you should be able to connect external speakers to your Crosley CR8017U Voyager Turntable and enjoy enhanced sound quality.
Add New Comment