User Manual Q&AAnswer
Dec 13, 2024 - 03:41 AM
Here is a step-by-step guide on how to use the UUP SS02005 Emergency LED Light Air Compressor to inflate your car tires:
1. Connect the Power Source: Plug the inflator into a DC 12V power source, such as your vehicle's cigarette lighter or battery clamps.
2. Choose the Pressure Unit: Select the desired pressure unit (PSI, BAR, or KPA) using the unit button on the digital display.
3. Set the Target Pressure: Enter the desired pressure using the digital display. Make sure to set the pressure according to your vehicle's recommended tire pressure, which can be found in the owner's manual or on a sticker inside the driver's side door jamb.
4. Start Inflating: Press the power button to begin inflating the tire. The compressor will automatically stop when the target pressure is reached.
Tips for Use:
- Always check the tire pressure when the tire is cold, as heat from driving can increase tire pressure.
- Use the correct pressure for your vehicle, as specified in the owner's manual.
- Monitor the pressure closely to avoid over-inflation, which can be harmful to the tire.
- Store the inflator in a dry, clean environment to prevent damage.
Please refer to the user manual provided with your UUP SS02005 Emergency LED Light Air Compressor for more detailed instructions and safety precautions.
Add New Comment