User Manual Q&AAnswer
Dec 13, 2024 - 03:39 AM
To switch between different units of measurement on the GERCHWAY DTM-200PSI-P Digital Tire Inflator, please follow the steps below:
1. Turn on the digital display by pressing the power button.
2. Once the display is on, press and hold the unit button for a few seconds until the current unit of measurement starts flashing on the screen.
3. While the unit is flashing, press the unit button repeatedly to cycle through the available units. The available units are PSI, BAR, KPA, and Kg/cm².
4. Stop pressing the unit button when the desired unit of measurement is displayed on the screen.
5. The inflator will now display tire pressure readings in the selected unit of measurement.
Please note that the unit button may be labeled differently on the inflator, so refer to the user manual or the device itself to locate the correct button.
For more detailed instructions and illustrations, please refer to the user manual provided with the GERCHWAY DTM-200PSI-P Digital Tire Inflator.
Add New Comment