User Manual Q&AAnswer
Dec 13, 2024 - 03:22 AM
To use the WindGallop LD-1689 Digital Car Tire Inflator, follow these steps:
1. Start the Car Engine: Ensure that the car engine is running before using the tire inflator. This will provide power to the inflator.
2. Plug in the Power Connector: Insert the power connector of the inflator into the car's cigarette lighter socket. Make sure it is securely connected.
3. Connect the Air Hose Nozzle: Attach the air hose nozzle tightly to the tire valve and secure it by pressing the buckle. Ensure a tight seal to prevent air leakage.
4. Preset the Tire Pressure: Use the control panel on the inflator to set the desired tire pressure value. The digital gauge will display the pressure settings.
5. Start Inflating: Press the on/off button on the inflator to begin inflating the tire. The inflator will automatically stop when the preset pressure is reached. You can monitor the pressure on the digital gauge.
6. Disconnect the Air Hose: Once the inflation is complete and the desired pressure is reached, remove the air hose nozzle from the tire valve. Unplug the power connector from the car's cigarette lighter socket.
It is important to note that the WindGallop LD-1689 Digital Car Tire Inflator comes with a user manual that provides detailed instructions on its usage. Please refer to the user manual for additional information and safety precautions.
Add New Comment