User Manual Q&AAnswer
Dec 13, 2024 - 02:48 AM
To use the USB charging ports on the Schumacher SC1306 12V Fully Automatic Jump Starter, follow these steps:
1. Locate the USB charging ports: The jump starter should have one or more USB ports on its body. These ports are typically labeled as "USB" or have the USB symbol.
2. Connect your device: Use a compatible USB charging cable to connect your device (such as a smartphone or tablet) to the USB port on the jump starter. Plug the USB end of the cable into the USB port on the jump starter, and the other end into your device.
3. Power on the jump starter: Ensure that the jump starter is turned on by pressing the power button or switch. The LED indicators on the jump starter should light up, indicating that it is powered on.
4. Check the device charging: Once your device is connected to the jump starter, it should start charging automatically. You can check the charging status on your device's screen or by looking for the charging symbol.
5. Charging completion: Once your device is fully charged, you can disconnect it from the USB port on the jump starter.
Note: The USB charging ports on the Schumacher SC1306 are designed to provide power to charge smartphones, tablets, and other USB-powered devices. However, please note that the charging speed may vary depending on the device and the power output of the jump starter.
For more detailed instructions and safety precautions, please refer to the user manual provided with the Schumacher SC1306 12V Fully Automatic Jump Starter.
Add New Comment