User Manual Q&AAnswer
Dec 13, 2024 - 02:39 AM
To adjust the depth of the nails with the Metabo HPT NR90AES1 Framing Nailer, follow these steps:
1. Disconnect the nailer from the air supply and ensure it is not loaded with nails.
2. Locate the depth adjustment dial on the side of the nailer, near the trigger.
3. Rotate the depth adjustment dial clockwise to increase the depth or counterclockwise to decrease the depth.
4. Test the nailer by firing a nail into a scrap piece of material.
5. If the nail is not driven to the desired depth, repeat steps 3 and 4 until the desired depth is achieved.
For more detailed instructions and illustrations, please refer to the user manual provided.
Add New Comment