User Manual Q&AAnswer
Dec 13, 2024 - 02:30 AM
To adjust the pressure on the CRAFTSMAN CMEC6150K 6-Gallon Air Compressor, follow these steps:
1. Set the On/Off switch to the "Off" position and unplug the unit.
2. Turn the regulator xxxx counterclockwise to fully close it, ensuring that the regulated pressure gauge reads 0 PSI.
3. Plug in the unit and set the On/Off switch to the "On" position.
4. Attach your air tool or accessory to the quick connect.
5. Gradually turn the regulator xxxx clockwise to increase the pressure until it reaches the desired level. The outlet pressure gauge will indicate the pressure available at the outlet side of the regulator.
6. Monitor the pressure using the outlet pressure gauge and adjust as needed.
Note: The regulated pressure should never exceed the maximum pressure rating of your air tools or accessories. Always refer to the manufacturer's specifications for the maximum pressure rating.
For more detailed instructions and safety information, please refer to the CRAFTSMAN CMEC6150K 6-Gallon Air Compressor Instruction Manual.
Add New Comment