User Manual Q&AAnswer
Dec 13, 2024 - 02:18 AM
To set up the Reyee REX12 WiFi Extender Booster Signal Repeater, you can follow one of the scenarios mentioned in the user manual:
Scenario 1: Connect to Reyee Device (Reyee Mesh)
1. Plug the extender halfway between your Reyee router and the Wi-Fi dead zone (within router signal range). Wait until the signal status LED turns solid green.
2. Click the Mesh button on your primary Reyee router (not the extender). Wait until the signal status LED turns solid white.
Scenario 2: Connect to Other Brand Router
1. Plug the extender halfway between your router and the Wi-Fi dead zone (within router signal range). Wait until the signal status LED turns solid green (this might take up to 1-2 minutes).
2. Connect your computer or smartphone to the SSID "@Reyee-sXXXX". The instruction GUI should launch automatically. If not, visit "http://10.44.77.254" to configure the extender.
3. The signal status LED should turn solid white, indicating a successful connection to the router.
Scenario 3: Connect via WPS
1. Plug the extender halfway between your router and the Wi-Fi dead zone (within router signal range). Wait until the signal status LED turns solid green.
2. Press the WPS button on your router.
3. Within 2 minutes, press the WPS button on the extender. Wait until the signal status LED turns solid white.
4. If the extender connects to a dual-band router, it will boost the 5G Wi-Fi signal.
Scenario 4: Connect to the Modem
1. Plug the extender next to your modem. Wait until the signal status LED turns solid green.
2. Connect your computer or smartphone to the SSID "@Reyee-sXXXX" or visit "http://10.44.77.254" to configure the extender.
3. Connect the extender to the modem using an Ethernet cable. Wait until the signal status LED turns solid green.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment