User Manual Q&AAnswer
Dec 13, 2024 - 02:16 AM
To reset the EJRR AD2 WiFi Extender to its factory settings, follow these steps:
1. Locate the reset button on the extender. It is usually a small hole labeled "Reset" or "RST" on the device.
2. Using a paperclip or a similar tool, press and hold the reset button for about 10 seconds.
3. Release the reset button after 10 seconds. The extender will restart and return to its factory default settings.
Please note that performing a factory reset will erase all the customized settings on the extender, including the network name and password. After the reset, you will need to set up the extender again using the provided installation guide or the web-based interface.
For more detailed instructions on resetting the EJRR AD2 WiFi Extender, refer to the user manual provided with the product.
Add New Comment