User Manual Q&AAnswer
Dec 13, 2024 - 01:54 AM
To charge the AVAPOW A68 Car Battery Jump Starter, follow these steps:
1. Locate the charging port on the jump starter. It is usually located on the side or back of the device.
2. Connect the USB Type-C charging cable to the charging port of the jump starter.
3. Plug the other end of the charging cable into a power source, such as a wall adapter or a USB port on a computer.
4. The LED indicators on the jump starter will start flashing or remain solid, indicating that the device is charging.
5. Allow the jump starter to charge until the LED indicators show a full charge. This usually takes a few hours, depending on the remaining battery level.
6. Once fully charged, disconnect the charging cable from the jump starter and the power source.
It is recommended to keep the jump starter charged regularly, ideally every 3 months, to ensure it is ready for use in case of emergencies.
Add New Comment