User Manual Q&AAnswer
Dec 13, 2024 - 01:51 AM
To jump-start a car using the NEXPOW Q10S Car Jump Starter, follow these step-by-step instructions:
1. Ensure that the jump starter's power level is greater than 50%. Regularly charge the jump starter every 2-3 months to maintain optimal condition.
2. Locate the car battery and identify the positive (+) and negative (-) terminals. The positive terminal is usually marked with a "+" symbol and is typically red, while the negative terminal is usually marked with a "-" symbol and is typically black.
3. Connect the smart jumper cables to the car battery terminals. Attach the red cable clamp to the positive terminal of the car battery and the black cable clamp to the negative terminal of the car battery. Ensure a secure connection.
4. Plug the jumper cables into the corresponding ports on the NEXPOW Q10S Car Jump Starter. The red cable should be connected to the positive (+) port and the black cable to the negative (-) port.
5. Start the car engine. If the jump starter is connected correctly, the car should start. If the car does not start, check the connections and ensure they are secure.
6. Once the car starts, remove the jumper cables in reverse order. Start by disconnecting the black cable clamp from the negative terminal of the car battery, followed by the red cable clamp from the positive terminal. Ensure the cables do not touch each other or any metal surfaces.
It is important to read and follow the instructions provided in the user manual for the NEXPOW Q10S Car Jump Starter to ensure safe and proper usage.
Add New Comment