User Manual Q&AAnswer
Dec 13, 2024 - 01:36 AM
To set the alarm on the Peakeep MHP-9060 Digital Alarm Clock, please follow these steps:
1. Make sure the clock is powered on and the current time is displayed on the screen.
2. Locate the buttons on the top or sides of the clock labeled "Alarm" or "Alarm Set."
3. Press and hold the "Alarm" or "Alarm Set" button until the alarm time starts flashing on the screen.
4. Use the hour and minute buttons to adjust the alarm time to your desired wake-up time.
5. Once you have set the alarm time, press the "Alarm" or "Alarm Set" button again to confirm and save the settings.
6. The alarm is now set and will activate at the designated time. The alarm will start with a gentle beeping sound that gradually increases in volume over 90 seconds.
7. To snooze the alarm and get a few extra minutes of sleep, press the snooze button located on the top of the clock. Each press of the snooze button will give you an additional 8 minutes of snooze time.
8. To turn off the alarm completely, press any button other than the snooze button when the alarm is sounding.
Please refer to the Peakeep MHP-9060 Digital Alarm Clock Operating Manual for more detailed instructions and illustrations.
Add New Comment