User Manual Q&AAnswer
Dec 13, 2024 - 01:30 AM
To set the alarm on the Sharp SPC033 LED Digital Alarm Clock, follow these steps:
1. While holding down the ALARM button, press the HOUR button to advance to the correct hour. The PM indicator will light when the hour is advanced into the PM time.
2. While holding down the ALARM button, press the MIN button to advance to the correct minute.
3. Release the ALARM button when the correct alarm time is shown on the display.
4. To verify your alarm time setting, press and hold the ALARM button, and the alarm time will appear on the display.
5. When setting the alarm time, make sure you are in the correct AM or PM time as indicated by the PM light on the display.
Once the alarm is set, you can activate it by pulling the ALARM ON/OFF switch to raise it into the ON position. The ALARM ON indicator will light, and the alarm will sound at the preset time. To silence the alarm, press the ALARM ON/OFF switch into the OFF position.
For more detailed instructions and information, please refer to the Sharp SPC033 LED Digital Alarm Clock Instruction Manual.
Add New Comment