User Manual Q&AAnswer
Dec 13, 2024 - 12:47 AM
According to the GoFish Cam 8-04879 Underwater Fishing Camera Basic Owner's Manual, attaching the camera to your fishing line is a straightforward process. Here's a step-by-step guide:
1. First, ensure that the camera is turned off and the fishing line is not tangled or twisted.
2. Locate the attachment point on the camera. It is a small metal loop located on the bottom side of the camera.
3. Take your fishing line and thread it through the metal loop. Make sure to pass the line from the bottom up, so the camera hangs correctly.
4. Once the line is through the loop, tie a secure knot. The manual suggests using a Palomar knot for maximum strength and reliability.
5. After tying the knot, pull it tight to ensure it is secure. Trim any excess line if necessary.
6. Now, you can turn on the camera and cast it into the water. The camera will be attached to your fishing line and ready to capture underwater footage.
It's important to note that the manual provides additional tips and precautions for attaching the camera, such as ensuring the knot is tight and regularly checking the attachment during use. Following these instructions will help you properly attach the GoFish Cam to your fishing line and enhance your fishing experience.
Add New Comment